Tips (press to unfold)

The address of your PLC is usually a full IP within your network starting with "http://" and ending with "/" (for example: "http://192.168.1.10/").

The refresh rate decides how often the app asks your PLC for information. Usually 5 seconds is enough for smooth functioning. You can try less but entering a too small number might slow everything down.

You might want to export your configuration for two reasons: to edit it on your PC via a web page (www.edom-plc.pl/wago/EdomApp/) or to import it to another device.

Tips (press to unfold)

Here is the list of defined scenes. You can add an empty scene with the "Add Scene" button. Clicking a scene name will move you to scene configuration screen.

Once a scene is configured you can assign it to a button. Go to Screen->Group->Element edition and choose 'Scene' as the button type. Then choose the desired scene name.

Tips (press to unfold)

Name of the scene will be displayed during the configuration and used when a scene button is configured.

Cloning Scene will help you create more scenes with the same set of items.

Remove Scene button deletes the scene. You will be promped for confirmation.

Scene Items are elements to be switched when a scene button is pressed. They are like tap buttons but the target state must be given. Accepted values are 1 or 0.

Once a scene button is pressed the app checkes if at the Read Address the value is equal to Target State. If not the Write Address is tapped (sending 1 followed by 0).

Tips (press to unfold)

The name of the screen will be visible at the very top of each panel.

You can reorder your screens by pushing the up and down arrows. Naturally, no reordering is possible if you have only one screen.

Currently there are 2 display types to choose from: the first is based on buttons arranged in columns and the second is based on a listview. Give it a try!

You can also remove the screen by pressing the blue button. You will be asked for confirmation and afterwards you can always decide to cancel the changes.

The Groups are containers of control fields. Each group will be separated by a title or a separator bar.

To add a group press the "+Add Group" button.

Tips (press to unfold)

The name of the group will be shown as a separator between buttons or a description bar on the list view.

You can reorder your groups by pushing the up and down arrows. Naturally, no reordering is possible if you have only one group.

Number of columns has effect only on the "Buttons" display type and decides in how many columns the buttons will be arranged.

You can remove the group by pressing the blue button. You will be asked for confirmation and afterwards you can always decide to cancel the changes.

The Elements are the control fields. Click one of them to edit the details.

To add an element press the "+Add Element" button.

Tips (press to unfold)

The name of the element will be show as a label describing the control field.

You can reorder your elements by pushing the up and down arrows. Naturally, no reordering is possible if you have only one screen.

The read and write parameters are needed for communication with the PLC. Read is usually a PLC in or out (QX3.1 or IW0) and write can be a dedicated variable (MB0). For more details go to www.edom-plc.pl.

NEW! You can enter more than 1 write addresses in the write field. Just separate them with ";", like "MB1;MB2". If you do so, one button will TAP more than one variable. It can be usefull for controlling more than one blind.

Element type decides what type of control field is shown on the screen. Try them all to see the difference.

You can also remove the element by pressing the blue button. You will be asked for confirmation and afterwards can always decide to cancel the changes.